Tuotetta on etävarastossamme, toimitusaika noin 5-6 työpäivää. Lisätietoja
Bring - Toimitus huoltopisteeseen
Katso kuljetusvaihtoehdot
Bring - Toimitus huoltopisteeseen
Gratis
Bring - Kotiinkuljetus -arkisin.
24,80
EUR
89,06
ilman ALV 71,82
Kokonaishinta sis. toimitus
89,06
Datablad
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten Luo käyttäjä Kirjaudu
ORIENTATION & A MOVABLE I/O PANEL The modular MasterBox Q500L can orient vertically and horizontally with rubberized thumbscrews that also act as feet. Depending on hardware configuration, the movable I/O panel can be relocated to multiple positions to retain its accessibility.
VERSATILE PSU BRACKET The PSU bracket enables the PSU to adapt to different clearance requirements and motherboard form factors. The PSU bracket can shift up or down for top radiator/graphics card clearance and can also be relocated for ITX systems.
FULLY PERFORATED CHASSIS The top, front, rear, and bottom panels are fully perforated to support various fan configurations.
MAGNETIC DUST FILTERS The magnetic dust filters feature a unique design. Magnets allow for quick removal and installation for easy cleaning of the dust filters with rubber stompers to keep the filters from sliding.
EDGE-TO-EDGE TRANSPARENT SIDE PANEL The side panel displays system builds in full view.
COOLING SUPPORT The bottom supports up to two 120mm fans. The rear supports a 120mm fan or 120mm radiator. The top supports up to two 120mm/140mm fans or a 120/240mm radiator.
STORAGE SUPPORT Each storage caddy can mount either 2x 2.5" drives or 1x 3.5" drive, two caddies included. Possible Configurations: 4x 2.5" drives | 2x 3.5" drives | 2x 2.5" drives + 1x 3.5" drive
MOTHERBOARD SUPPORT The internal layout and PSU location adapts to the motherboard. If a standard ATX motherboard is used, the PSU mounts to the top-front of the chassis with the ability to shift upward or downward. For mini-ITX builds, the PSU can be located in the conventional bottom-rear position for increased front panel ventilation.
CLEAN ROUTING SPACE Behind the motherboard tray, 27~30mm width of space is offered for cable management with the entire perimeter dedicated as a channel for cables.
Tuotekuvaus
Cooler Master MasterBox Q500L - torni - ATX
Tuotteen tyyppi
Järjestelmäkaappi
Koko tai muoto
Torni
Ikkunoitu sivupaneeli
Kyllä, akryyli
Väri
Musta
I/O liittimet
2 x USB 3.0 1 x äänilinjatulo 1 x audio line-out
Tuetut emolevyt
ATX, microATX, Mini-ITX
Järjestelmäkaapin ominaisuudet
Tukee 120 mm:n jäähdytintä takana, alapölysuodatin, etummainen magneettipölysuodatin, supports 120/240 mm radiator in top, magneettinen yläpölysuodin
Virtalähde
Ei virransyöttöä (ATX / PS/2)
Ulkomitat (PxSxK)
23 cm x 38.6 cm x 38.1 cm
Paino
3.83 kg
Generelt
Koko tai muoto
50 cm
Sisäisten kiintolevyjen enimmäismäärä
Minne - DIMM 168-pin
Väri
2 x minne - SO DIMM 72-pin
Prosessorin jäähdyttimen enimmäiskorkeus
1 x parallell - IEEE 1284 (EPP/ECP) - 36 PIN Centronics 1 x seriell - RS-232
Nettverkstilknytning
Laajennuspaikat
46.5 cm
Prosessor / Minne / Lager
Korkeus
175 watt
Vægt (gram)
5100
Löydämme tuotteen järjestelmästämme helposti seuraavalla tuotenumerolla
EAN:
4719512080580
SKU:
MCB-Q500L-KANN-S00
Varför upplever jag att exakt samma varor finns med flera olika produktnummer?
Tillverkarna ger ofta ut samma produkter med olika produktnummer, vanligtvis handlar det uteslutet om olika versioner av emballage. T.ex. så kan emballaget målinriktas för olika länder.
Vi försöker på bästa sätt samla varorna, men det kan upplevas som att samma produkter finns med olika produktnummer i vårt system.