Ilmoita minulle, kun tuotetta on jälleen tarjolla varastossa
Email:
Varastovahti on luotu. Lähetämme sähköpostin kun tuotetta on taas varastossa.
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten Luo käyttäjä Kirjaudu
Multifunctional 1-channel actuator with one input to activate/deactivate lights or other appliances featuring 1 Input for integration of switches and other devices (110- 240 V~). Featuring integrated logic module with comfort and timer functions, power measurement and short circuit detection (1x 400 W @ 230 V~).
The small green control modules, called frogs, are the heart of every frogblue system and form the basis of the Bluetooth®-based smart building solution from frogblue. Our frogs can switch, dim, measure, open doors or react to buttons, switches and window contacts.
Connected to the mains or battery-powered, they are linked together with "virtual cables" via the frogblue Bluetooth® mesh network. They forward messages and thus extend the range. Data transfer between the frogs is always encrypted (128 bit), and this in addition to Bluetooth®. frogs are smart, packed with innovative functions, are very easy to configure and do not require a central unit or control cabinet. With a power consumption of just 0.2 watts, they are also extraordinarily energy-conscious.
Installed in a deep flush-mounted back box (recommended socket depth: 63 mm) behind any conventional switch/button, junction box, weatherproof outdoor socket or lamp outlet, this multifunctional 1-channel actuator can be used to control the lights or other appliances.
For example, with this frog and another frog as an input module, e.g. the frogIn3-AC, outside lighting can be flexibly switched from indoors via 3 inputs (buttons or switches) without additional infrastructure. Supplied with power and connected to the corresponding lamp, a lighting circuit with up to 400 W can be controlled via the 1 output of the frogAct1-0. Any external sensors, such as a motion detector, can be connected to its input (230 V). If the motion detector triggers, all spotlights equipped with frogs are wirelessly switched on for a preselected time. Short flashes from one of the spotlights indicate the area where motion was detected.
The frogs can be controlled with the frogblue HomeApp via smartphone or tablet (iOS and Android), frogDisplay, frogKey or simply via the conventional switch/button connected to a frog. We always recommend buttons, as the full range of functions can be used with individual and different touch patterns, such as double or triple clicks, etc. Intended use For assembly in device sockets according to DIN 49073. Socket depth minimum 53 mm when installed behind switch insert, individual installation is required at lower depth. A socket depth of 63 mm is recommended.
System information This device is a product of the frogblue system. Detailed technical expertise obtained through frogblue training sessions is a prerequisite. The functionality of the device depends on the software. Detailed information regarding software versions and the respective range of functions can be found on the frogblue website. Technical descriptions, additional detailed instructions as well as notes, information regarding proper disposal can be found in the manual, which is available on the frogblue website. Commissioning and configuration will be executed using the frogblue app.
Safety information Electrical devices may only be installed and assembled by qualified, skilled electricians. Failure to observe the instructions can cause damage to the device and result in fire and other hazards. Danger caused by electric shock. Device is not suitable for disconnection from power voltage. Even when the device is turned off, the load is not electrically isolated from the mains. Before starting work on the device or replacing light sources, always disconnect the power supply and switch off the circuit breakers. Country-specific regulations must always be observed.
Tuotetyyppi
Kytkevä toimilaite
Sisäänrakennettu näyttö
Ei
Kanavien määrä
1 kanavaa
Ulkotilan kantavuus enintään
30 m
International Protection (IP)-koodi
IP20
Tuotteen väri
Vihreä
Langaton yhteys
Kyllä
Virtalähteen malli
AC
Teho
400 W
Tulojännite
110-240 V
Syötteen taajuus
50/60 Hz
Käyttölämpötila (T-T)
25 - 50 °C
Varastointilämpötila
25 - 70 °C
Tuotteen leveys
53 mm
Tuotteen syvyys
48 mm
Tuotteen korkeus
21 mm
Paino
24 g
Pakkauksen leveys
75 mm
Pakkauksen syvyys
30 mm
Pakkauksen korkeus
75 mm
Pakkauksen paino
36 g
Löydämme tuotteen järjestelmästämme helposti seuraavalla tuotenumerolla
EAN:
4260578530187
SKU:
A1-1-400.01
Varför upplever jag att exakt samma varor finns med flera olika produktnummer?
Tillverkarna ger ofta ut samma produkter med olika produktnummer, vanligtvis handlar det uteslutet om olika versioner av emballage. T.ex. så kan emballaget målinriktas för olika länder.
Vi försöker på bästa sätt samla varorna, men det kan upplevas som att samma produkter finns med olika produktnummer i vårt system.