Ceresit Julkisivumaali Nanosilikoni Ct49 A Base15l

Brand- Ceresit. Model- CT49 A. Quantity in package, l- 15. Paint type- Emulsion. Shine- Matte. Thinner- Water. For finishing works- Indoor and outdoor. Suitable for coating surfaces- , . Output- 0,3 l/m² . Additional information- CT 49 paint can be used on a durable, smooth, dry and clean base (free of substances that reduce adhesion, such as grease, bitumen, dust):– cement (older than 28 days);– ordinary cement plaster, cement-lime and lime plaster (older than 14 days);– thin-layer mineral and mineral-polymer plaster (older than 7 days);- thin-layer acrylic and silicone plaster (older than 3 days);- thin-layer silicate plaster (older than 5 days);- gypsum bases (only inside buildings with humidity less than 1%), pre-coated with Ceresit CT 17;- gypsum board, gypsum boards (only inside buildings), mounted according to the board manufacturer's recommendations, pre-coated with CT 17:- strong paint coatings, strongly adhered to the base. First, uneven and damaged bases must be repaired. Plaster filler Ceresit CT 29 or CT 34 can be used for repair. It is recommended to check the strength of already existing mineral layers. Existing dirt, low-strength layers, lime and adhesive paint coatings, as well as wallpaper or glue residues, must be completely removed. To remove material residues, it is recommended to use washing devices, a solution of water with CT 98. After washing with water, the base must dry..