0,00
(toimituskulut: 0,00)
Steinel HL 2020 E - Lämpöpuhallin - 2200 W - 3-nopeuksinen - 150 - 500 l/min
Tuotenumero: [3039780] | Valmistaja: steinel | Mallinum: 352202 | EAN: 4007841352202
Etävarastossa
Tuotetta on etävarastossamme, toimitusaika noin 5-6 työpäivää. Lisätietoja
Kuljetus 10,04 - Budbee - Laatikko - Valitse itse mikä laatikko.
Toimituskulut on laskettu vastaanottajan postinumeron perusteella: - Vaihda postinumero
Syötä postinumero toimitusta varten:
Katso kuljetusvaihtoehdot
| Budbee Laatikko - Nouda valitsemastasi laatikosta! | 10,04 |
| Bring - Toimitus huoltopisteeseen | 10,04 |
| Bring - Kotiinkuljetus -arkisin. | 20,08 |
EUR
168,03
ilman ALV 133,89
Kokonaishinta sis. toimitus
178,07
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten
Luo käyttäjä
Kirjaudu
Luo käyttäjä
Kirjaudu
Send på mail
For passionate DIYers. In professional quality.
The HL 2020 E hot air tool is extremely robust, promising to last a good 20% longer than its predecessor. Professional extras: the residual heat indicator warns the user that the delivery nozzle is still hot and can cause burns even long after the tool has been unplugged. And the joystick permits intuitive operation and use. And talking of use: the HL 2020 E hot air professional is designed for all STEINEL nozzles and, delivering hot air at a temperature of up to 630 °C, the ideal tool for shaping, desoldering printed circuit boards, welding plastics, drying filler, shrinking on cable sleeves, soldering pipes and other jobs requiring high, accurately adjustable heat as well as a powerful blower. The current working temperature and airflow rate is indicated on the LCD display which is easy to read at any light level. The tool immediately responds to heat build-up by indicating a warning triangle on the display.
Benefits
: LCD display, residual heat indicator for optimum protection, ergonomic operation by joystick, impressive 2200 watts of power, adjustable from 80 °C to 630 °C in 10 °C steps. Airflow rate adjustable in three stages (150 / 150-300 / 300-500 l/min.). With plastic case and 9 mm reduction nozzle. Optionally available fine-dust filter and HL Scan for measuring temperature at the workpiece. The mains power cord is very easy to replace by removing the cap on the handle.
The HL 2020 E hot air tool is extremely robust, promising to last a good 20% longer than its predecessor. Professional extras: the residual heat indicator warns the user that the delivery nozzle is still hot and can cause burns even long after the tool has been unplugged. And the joystick permits intuitive operation and use. And talking of use: the HL 2020 E hot air professional is designed for all STEINEL nozzles and, delivering hot air at a temperature of up to 630 °C, the ideal tool for shaping, desoldering printed circuit boards, welding plastics, drying filler, shrinking on cable sleeves, soldering pipes and other jobs requiring high, accurately adjustable heat as well as a powerful blower. The current working temperature and airflow rate is indicated on the LCD display which is easy to read at any light level. The tool immediately responds to heat build-up by indicating a warning triangle on the display.
Benefits
: LCD display, residual heat indicator for optimum protection, ergonomic operation by joystick, impressive 2200 watts of power, adjustable from 80 °C to 630 °C in 10 °C steps. Airflow rate adjustable in three stages (150 / 150-300 / 300-500 l/min.). With plastic case and 9 mm reduction nozzle. Optionally available fine-dust filter and HL Scan for measuring temperature at the workpiece. The mains power cord is very easy to replace by removing the cap on the handle.