EUR 0,00
(toimituskulut: 0,00)
FunFloor Premium interaktiivinen lattia
Tuotenumero: [4116080] | Valmistaja: Dolina Noteci | Mallinum: Premium | EAN: 5902921305552
Toimitus ennen joulua
Tuotteet on tilattava viimeistään tiistai 09-12-2025 kl. 12.00 varmistaaksesi tuotteen saapumisen ennen 23.12. Saa tilata myös aikaisemmin - ennen kuin olemme kiireisiä :-)
Etävarastossa
Tuotetta on etävarastossamme, toimitusaika noin 7-9 työpäivää. Lisätietoja
Kuljetus 10,04 - Budbee - Laatikko - Valitse itse mikä laatikko.
Toimituskulut on laskettu vastaanottajan postinumeron perusteella: - Vaihda postinumero
Syötä postinumero toimitusta varten:
Katso kuljetusvaihtoehdot
| Budbee Laatikko - Nouda valitsemastasi laatikosta! | 10,04 |
| Bring - Toimitus huoltopisteeseen | 10,04 |
| Bring - Kotiinkuljetus -arkisin. | 20,08 |
EUR
56,73
ilman ALV 45,20
Kokonaishinta sis. toimitus
66,77
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten
Luo käyttäjä
Kirjaudu
Luo käyttäjä
Kirjaudu
Send på mail
Asiakirjat & Käsikirjat
1540169_safety_de_1Premium PLA is a high-end general purpose Poly-Lactic Acid type of 3D printer filament which is more purer and lesser modified than our EasyFil PLA for instance.
Premium PLA is a slightly harder PLA with an excellent thermal stability and a slightly faster crystallization process of the 3D printed layers and is often used for large(r) scale prototyping on industrial-sized 3D printers. Therefore Premium PLA is available on large spool sizes.
Unique features
- Very easy to print
- Warp-free printing and no deformation after cooling
- Improved flowing behaviour and inter-layer adhesion
- Good first layer adhesion to several (un)heated print surfaces
- Almost odourless processing/printing
- Biodegradable
- Available in a variety of semi-translucent colors and opaque black/white
General printing guidelines *
Nozzle size: = 0.15mm
Print temp: ± 180 - 220° C
Heat bed: ± 0 - 60° C
Layer height: = 0.1mm
Print speed: Medium
Fan speed: 50-100%
Flow rate: ± 100%
Retraction: Yes ± 5mm
Experience level: Beginner
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
Compliance *
This filament is compliant to below listed directives and regulations.
- RoHS directive 2011/65/EC
- REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.
Premium PLA is a slightly harder PLA with an excellent thermal stability and a slightly faster crystallization process of the 3D printed layers and is often used for large(r) scale prototyping on industrial-sized 3D printers. Therefore Premium PLA is available on large spool sizes.
Unique features
- Very easy to print
- Warp-free printing and no deformation after cooling
- Improved flowing behaviour and inter-layer adhesion
- Good first layer adhesion to several (un)heated print surfaces
- Almost odourless processing/printing
- Biodegradable
- Available in a variety of semi-translucent colors and opaque black/white
General printing guidelines *
Nozzle size: = 0.15mm
Print temp: ± 180 - 220° C
Heat bed: ± 0 - 60° C
Layer height: = 0.1mm
Print speed: Medium
Fan speed: 50-100%
Flow rate: ± 100%
Retraction: Yes ± 5mm
Experience level: Beginner
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
Compliance *
This filament is compliant to below listed directives and regulations.
- RoHS directive 2011/65/EC
- REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.
|