EUR 0,00
(toimituskulut: 0,00)
LA-402 Telecoil-vahvistin
Tuotenumero: [5620202] | Valmistaja: Monacor | Mallinum: LA-402 | EAN: 4007754270495
Toimitus ennen joulua
Tuotteet on tilattava viimeistään keskiviikko 10-12-2025 kl. 12.00 varmistaaksesi tuotteen saapumisen ennen 23.12. Saa tilata myös aikaisemmin - ennen kuin olemme kiireisiä :-)
Etävarastossa
Tuotetta on etävarastossamme, toimitusaika noin 7-9 työpäivää. Lisätietoja
Bring - Toimitus huoltopisteeseen
Katso kuljetusvaihtoehdot
| Bring - Toimitus huoltopisteeseen | Gratis |
| Bring - Kotiinkuljetus -arkisin. | 20,08 |
| Bring - Kotiinkuljetus -arkisin. | 20,08 |
EUR
865,72
ilman ALV 689,82
Kokonaishinta sis. toimitus
865,72
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten
Luo käyttäjä
Kirjaudu
Luo käyttäjä
Kirjaudu
Send på mail
Active loop amplifier,;with dynamic compressor for setting up an audio induction loop system in large rooms up to 750 m2.
Inductive transmission of audio signals allows users of hearing aids with a T-coil or induction loop receivers, e.g. the LR-202, to receive audio signals. Wireless transmission is an advantage of audio induction loop systems which makes it possible for the user to move freely within the loop.
Audio induction loop systems are used for various applications, e.g. as a hearing aid for the hearing impaired in houses of worship, theatres, cinemas, waiting rooms and lounges, as interpreting systems, for lectures in museums, exhibitions, etc.
With audio induction loop systems, an induction loop made of a wire winding is laid on the floor, the wall or along the ceiling and is controlled by a constant current amplifier. Thus, a magnetic field is created within the loop which induces a voltage into the T-coil of the hearing aid or into the induction loop receiver. In the receivers, this voltage is then converted again into an audio signal.;#Dynamic compressor;#Automatic talkover;#Metal loss correction 0-3 dB/oct.;#3 mic/line inputs with 40 V phantom power, to be switched on additionally;#6.3 mm input for inserting external devices;#Integrated SD card reader for reproduction of stored alarm messages;#2-way tone control;#LED level meter;#482 mm (19") rack installation with supplied mounting brackets;;Manufacturer information:;MONACOR INTERNATIONAL GmbH & Co. KG
Konsul-Smidt-Str. 68
28217 Bremen
Germany
[email protected];Warning and Safety Instructions;The device is supplied with dangerous mains voltage. Leave servicing to skilled personnel only and do not insert anything into the air vents. Risk of electric shock!
Do not use this device and disconnect it immediately from the power supply if the device or the power supply cable is visibly damaged, if a defect might have occurred after the device was dropped or suffered a similar accident, if malfunctions occur. Any repairs must be carried out by specialists.
The product is suitable for indoor use only. Protect it against dripping water, splash water and high air humidity (admissible ambient temperature range is 0 - 40 °C).
Never pull the mains cable to disconnect the mains plug from the socket, always seize the plug.
The heat generated in the device must be dissipated by air circulation. Never cover the air vents of the housing.
If the device is to be put out of operation definitely, dispose of the product in accordance with local regulations.
Inductive transmission of audio signals allows users of hearing aids with a T-coil or induction loop receivers, e.g. the LR-202, to receive audio signals. Wireless transmission is an advantage of audio induction loop systems which makes it possible for the user to move freely within the loop.
Audio induction loop systems are used for various applications, e.g. as a hearing aid for the hearing impaired in houses of worship, theatres, cinemas, waiting rooms and lounges, as interpreting systems, for lectures in museums, exhibitions, etc.
With audio induction loop systems, an induction loop made of a wire winding is laid on the floor, the wall or along the ceiling and is controlled by a constant current amplifier. Thus, a magnetic field is created within the loop which induces a voltage into the T-coil of the hearing aid or into the induction loop receiver. In the receivers, this voltage is then converted again into an audio signal.;#Dynamic compressor;#Automatic talkover;#Metal loss correction 0-3 dB/oct.;#3 mic/line inputs with 40 V phantom power, to be switched on additionally;#6.3 mm input for inserting external devices;#Integrated SD card reader for reproduction of stored alarm messages;#2-way tone control;#LED level meter;#482 mm (19") rack installation with supplied mounting brackets;;Manufacturer information:;MONACOR INTERNATIONAL GmbH & Co. KG
Konsul-Smidt-Str. 68
28217 Bremen
Germany
[email protected];Warning and Safety Instructions;The device is supplied with dangerous mains voltage. Leave servicing to skilled personnel only and do not insert anything into the air vents. Risk of electric shock!
Do not use this device and disconnect it immediately from the power supply if the device or the power supply cable is visibly damaged, if a defect might have occurred after the device was dropped or suffered a similar accident, if malfunctions occur. Any repairs must be carried out by specialists.
The product is suitable for indoor use only. Protect it against dripping water, splash water and high air humidity (admissible ambient temperature range is 0 - 40 °C).
Never pull the mains cable to disconnect the mains plug from the socket, always seize the plug.
The heat generated in the device must be dissipated by air circulation. Never cover the air vents of the housing.
If the device is to be put out of operation definitely, dispose of the product in accordance with local regulations.