D-Link DPE-301GS, Nopea Ethernet, Gigabitti Ethernet, 10,100,1000 Mbit/s, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, Valkoinen, CE, FCC, VCCI, RCM, 32,4 W
FBAC4895-B52C-4E03-B099-A6A8F8B8017B Created with sketchtool. 706D6907-81E1-46A2-B8F9-7B702A1EF2C7 Created with sketchtool. 6A870209-E7F5-44F5-A66F-09E20C85A0DC Created with sketchtool. 0BB04D6C-A9AB-4913-BF4F-5A23954E68E1 Created with sketchtool. 501E26C7-66C1-4DAA-B740-6CFAF55A1B39 Created with sketchtool. C105F7D3-D5EE-43C9-9EE8-05CC42B296D4 Created with sketchtool. D94689D8-7CBB-41C8-AC06-F79D81FF82D5 Created with sketchtool. DA4C7ED9-2512-4D52-94F0-92800F2A6E04 Created with sketchtool. 42E133FD-828F-4CF4-A0BF-560014487A57 Created with sketchtool. F52D9745-4BFD-4506-BEEF-630FD09EF2D9 Created with sketchtool.
Päävarastossa
Päävarastossa. Tilaa ennen klo 15:00 niin pyrimme lähettämään tuotteen tänään. (arkipäivisin) Lisätietoja

Kuljetus 10,04 - Budbee - Laatikko - Valitse itse mikä laatikko.

Toimituskulut on laskettu vastaanottajan postinumeron perusteella: - Vaihda postinumero
Syötä postinumero toimitusta varten: Tallenna
Katso kuljetusvaihtoehdot
Budbee Laatikko - Nouda valitsemastasi laatikosta!10,04
Bring - Toimitus huoltopisteeseen10,04
Bring - Kotiinkuljetus -arkisin.20,08

VARASTOTARJOUS

Tuotetta on päävarastossa 2 kappaletta

Nykyinen hinta on voimassa niin kauan kuin erää on jäljellä varastossa.

EUR 47,43
ilman ALV 37,79
Kokonaishinta sis. toimitus 57,47
The DPE-301GS PoE splitter is used with end devices such as wireless access points, IP cameras and VoIP phones that don't natively support PoE, but rather require DC power input. It receives PoE power on a network cable from a PoE switch or midspan injector, and splits the Ethernet and DC power into two separate cables. One cable provides the DC power, and the other cable provides the Ethernet signal. The DPE-301GS PoE splitter has two 10 / 100 / 1000 RJ-45 ports. One port is for PoE input, which is the network connection and is usually connected to a remote PoE switch or injector. The other port is for LAN output, which is the connection that provides the Ethernet signal to the end device.