0,00
(toimituskulut: 0,00)
Wiha 26745, Kaapelileikkuri, Punainen, Keltainen, Terästä, Metallinen, Punainen, Keltainen, 1,6 mm, 160 mm
Tuotenumero: [1748146] | Valmistaja: Wiha | Mallinum: 26745 | EAN: 4010995267452 | VVS-nr.: 904000157 | UNSPSC.: 27112114
Etävarasto (16-23 päivää)
Tuotetta on etävarastossa. Toimitusaika 16-23 arkipäivää. Lisätietoja
Kuljetus 10,04 - Budbee - Laatikko - Valitse itse mikä laatikko.
Toimituskulut on laskettu vastaanottajan postinumeron perusteella: - Vaihda postinumero
Syötä postinumero toimitusta varten:
Katso kuljetusvaihtoehdot
| Budbee Laatikko - Nouda valitsemastasi laatikosta! | 10,04 |
| Bring - Toimitus huoltopisteeseen | 10,04 |
| Bring - Kotiinkuljetus -arkisin. | 20,08 |
EUR
40,10
ilman ALV 31,95
Kokonaishinta sis. toimitus
50,14
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten
Luo käyttäjä
Kirjaudu
Luo käyttäjä
Kirjaudu
Send på mail
Lowers your costs
Durable thanks to high-quality, chrome-plated plier surface to prevent corrosion.
Saves money
Two tools in one for cutting to length and skinning.
Protect your health
Special DynamicJoint® design reduces effort required for cutting.
Offers you full protection
Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Standards
DIN ISO 5749.
Manufactured acc. to IEC 60900.
Head shape
Semi-circular, swedish style.
Design
Low wear lap joint, riveted and able to withstand high loads.
The Wiha DynamicJoint® ensures optimal transmission of hand strength to the cutting edges.
Lightweight action, clean cutting achieved by specially milled precision cutting edges.
Long term cutting is achieved through additional inductive hardening to approx. 64 HRC.
Rear cutting area near to plier joint also suitable for medium-hard and hard wire.
Front cutting area for soft wire, with precision stripping stations for 1.5 mm² and 2.5 mm² single-wire conductor.
Material
High quality C 70 tool steel, tempered.
Application
Special diagonal cutters with additional function for electrical installation.
For work in the area of live parts up to 1,000 V AC.
Durable thanks to high-quality, chrome-plated plier surface to prevent corrosion.
Saves money
Two tools in one for cutting to length and skinning.
Protect your health
Special DynamicJoint® design reduces effort required for cutting.
Offers you full protection
Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Standards
DIN ISO 5749.
Manufactured acc. to IEC 60900.
Head shape
Semi-circular, swedish style.
Design
Low wear lap joint, riveted and able to withstand high loads.
The Wiha DynamicJoint® ensures optimal transmission of hand strength to the cutting edges.
Lightweight action, clean cutting achieved by specially milled precision cutting edges.
Long term cutting is achieved through additional inductive hardening to approx. 64 HRC.
Rear cutting area near to plier joint also suitable for medium-hard and hard wire.
Front cutting area for soft wire, with precision stripping stations for 1.5 mm² and 2.5 mm² single-wire conductor.
Material
High quality C 70 tool steel, tempered.
Application
Special diagonal cutters with additional function for electrical installation.
For work in the area of live parts up to 1,000 V AC.