Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten Luo käyttäjä Kirjaudu
The Intellinet Network Solutions Gigabit Ethernet Media Converter was specifically designed to offer the network designer a device for migration from copper-based Ethernet to Fibre Ethernet. Now migration or expansion of existing networks can be achieved with minimum cost and complexity. The converter is completely transparent to the network so the network performs exactly the way it did before - only now it can support both copper and fibre mediums. \n \nExpands the Size of an Existing Network \nProvides fibre connectivity to Ethernet segments, allowing for even further networking expansion between extended workgroups. Also provides building-to-building connectivity without the need for the cost and disruption associated with the installation of additional routers. \n \nEnhances the Distance between Networking Devices \nConnecting the converter to fibre segments can further extend distances between networking nodes. This can be achieved by direct connection between the converter and a fibre-based node or networking device. \n \nCabling Flexibility \nNetwork managers can install fibre cabling anywhere within a network without changing the arrangement of copper-based Ethernet. The compact size of the converter allows it to be easily deployed in any narrow desktop location or to be used in a wall-mount installation. Several converters can be simultaneously installed into a 19"; rack-mountable chassis.\n\n- Data transfer rate: 1000 Mbps\n- One 1000Base-T RJ45 port, maximum distance 100 m / 300 ft. (Cat5e and better)\n- RJ45 port with Auto MDI/MDI-X support and auto-negotiation\n- One 1000Base-SX multi-mode Fibre SC duplex port\n- Fibre distance support: up to 220 m / 720 ft (62.5/125 µm cable) or 550 m / 1800 ft (50/125 µm cable)\n- Wavelength: 850 nm\n- Flow control\n- Status LEDs for power and Link/TX for both ports\n- External power adapter, 5 V DC\n- Functions as a stand-alone converter or can be used with the 14-slot media converter chassis, model 507356\n- Three-Year Warranty
Tuotekuvaus
Intellinet Gigabit Ethernet Media Converter, 1000Base-T to 1000Base-Sx (SC) Multi-Mode, 550m - valokuitu-mediamuunnin - 1GbE
Laitteen tyyppi
Valokuitu-mediamuunnin - RJ-45 / SC (monitila)
Koko tai muoto
Ulkoinen
Kaapelointityyppi
1000Base-SX, 1000Base-T
Tiedonsiirtonopeus
1000 Mbit/s
Optinen aallonpituus
850 nm
Tiedonsiirtoprotokolla
1GbE
Enimmäissiirtoetäisyys
550 m
Ulkomitat (PxSxK)
7 cm x 10.7 cm x 2.6 cm
Paino
0.5 kg
Valmistajan takuu
3 vuoden takuu
Generelt
Koko tai muoto
2 x minne - SIMM 72-pin
Väri
2 x minne - SO DIMM 72-pin
Fabrikantgaranti
Tiedonsiirtonopeus
Strøm på/av, tilbakestilling, meny, inngangsvalg
Optinen aallonpituus
88.9 cm
Enimmäissiirtoetäisyys
Drivers & Utilities, Ulead VideoStudio
Ominaisuudet
1200:1 / 5000000:1 (dynamisk)
Diverse
Virran kulutus (toiminnassa)
Rull (8 cm x 75 m)
Prosessor / Minne / Lager
Syvyys
14.8 kg
Korkeus
9.6 cm
Paino
12.2 cm
Strømforsyning
Huolto ja tuki
15.8 cm
Programvare / Systemkrav
Vähimmäiskäyttölämpötila
Intel 810
Enimmäiskäyttölämpötila
50 kg
Löydämme tuotteen järjestelmästämme helposti seuraavalla tuotenumerolla
EAN:
766623506533
Miksi samalla tuotteella on monta eri tuotesivua tai tuotenumeroa?
Valmistajat usein julkaisevat saman tuotteen monella eri tuotenumerolla. Usein eroa on vain pakkauksessa. Eri tuotepakkaus saattaa olla suunniteltu eri valtioille.
Yritämme parhaamme mukaan laittaa samat tuotteet saman tuotenumeron alle, mutta joskus sama tuote on eri tuotenumeroilla sivullamme.