0,00
(toimituskulut: 0,00)
PIR-ilmaisin 360° matala profiili, halkaisija 7,5 m. Asennuskorkeus 2 - 3,6 m. Musta
Tuotenumero: [21093812] | Valmistaja: Solar Plus | Mallinum: F.01U.414.145 | EAN: 4060039178329 | UNSPSC.: 46171608 | EL-nr.: 7885656106
Etävarastossa
Tuotetta on etävarastossamme. Toimitusaika noin 3-4 työpäivää.
Kuljetus 10,04 - Budbee - Laatikko - Valitse itse mikä laatikko.
Toimituskulut on laskettu vastaanottajan postinumeron perusteella: - Vaihda postinumero
Syötä postinumero toimitusta varten:
Katso kuljetusvaihtoehdot
| Budbee Laatikko - Nouda valitsemastasi laatikosta! | 10,04 |
| Bring - Toimitus huoltopisteeseen | 10,04 |
| Bring - Kotiinkuljetus -arkisin. | 20,08 |
EUR
56,27
ilman ALV 44,84
Kokonaishinta sis. toimitus
66,31
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten
Luo käyttäjä
Kirjaudu
Luo käyttäjä
Kirjaudu
Send på mail
DS936 Low Profile Panoramic PIR Detector
• Enhanced signal processing
• 360° x 7.5 m (24 ft) pattern
• Surface/semi-flush mountable
The ceiling mount, low profile panoramic DS936 PIR Detector uses alternate polarity pulse count. It also uses a Fresnel lens to provide up to 7.5 m of coverage and can be mounted on the surface, or semi-flush directly to a ceiling or a standard octagonal electrical box.
Technical specifications
Mechanical
Material High impact ABS plastic enclosure
Dimensions 3.05 cm x 11.7 cm
Mounting height range 2 m to 3.6 m
Location Surface or semi-flush on ceiling or on standard 10 cm octagonal electrical box
Enclosure material High impact ABS plastic enclosure
Enclosure dimensions 3.05 cm x 11.7 cm
Environmental
Operating temperature and storage -29°C to +49°C
Operating relative humidity 93%, non-condensing
Electrical
Current 15 mA at 12 VDC
Voltage 10 VDC to 15 VDC
Alarm output Normally-closed reed relay rated at 3.0 W,
125 mA at 28 VDC for resistive loads and protected by a 4.7 O resistor in the common C leg
Tampers output Normally-closed cover activated tamper switch with separate terminals. Tamper contacts rated 125 mA at 28 VDC maximum.
• Enhanced signal processing
• 360° x 7.5 m (24 ft) pattern
• Surface/semi-flush mountable
The ceiling mount, low profile panoramic DS936 PIR Detector uses alternate polarity pulse count. It also uses a Fresnel lens to provide up to 7.5 m of coverage and can be mounted on the surface, or semi-flush directly to a ceiling or a standard octagonal electrical box.
Technical specifications
Mechanical
Material High impact ABS plastic enclosure
Dimensions 3.05 cm x 11.7 cm
Mounting height range 2 m to 3.6 m
Location Surface or semi-flush on ceiling or on standard 10 cm octagonal electrical box
Enclosure material High impact ABS plastic enclosure
Enclosure dimensions 3.05 cm x 11.7 cm
Environmental
Operating temperature and storage -29°C to +49°C
Operating relative humidity 93%, non-condensing
Electrical
Current 15 mA at 12 VDC
Voltage 10 VDC to 15 VDC
Alarm output Normally-closed reed relay rated at 3.0 W,
125 mA at 28 VDC for resistive loads and protected by a 4.7 O resistor in the common C leg
Tampers output Normally-closed cover activated tamper switch with separate terminals. Tamper contacts rated 125 mA at 28 VDC maximum.