Ermenrich NetGeeks NU25 Optical Multimeter
FBAC4895-B52C-4E03-B099-A6A8F8B8017B Created with sketchtool. 706D6907-81E1-46A2-B8F9-7B702A1EF2C7 Created with sketchtool. 6A870209-E7F5-44F5-A66F-09E20C85A0DC Created with sketchtool. 0BB04D6C-A9AB-4913-BF4F-5A23954E68E1 Created with sketchtool. 501E26C7-66C1-4DAA-B740-6CFAF55A1B39 Created with sketchtool. C105F7D3-D5EE-43C9-9EE8-05CC42B296D4 Created with sketchtool. D94689D8-7CBB-41C8-AC06-F79D81FF82D5 Created with sketchtool. DA4C7ED9-2512-4D52-94F0-92800F2A6E04 Created with sketchtool. 42E133FD-828F-4CF4-A0BF-560014487A57 Created with sketchtool. F52D9745-4BFD-4506-BEEF-630FD09EF2D9 Created with sketchtool.
Etävarastossa
Tuotetta on etävarastossamme, toimitusaika noin 7-9 työpäivää. Lisätietoja

Kuljetus 10,04 - Budbee - Laatikko - Valitse itse mikä laatikko.

Toimituskulut on laskettu vastaanottajan postinumeron perusteella: - Vaihda postinumero
Syötä postinumero toimitusta varten: Tallenna
Katso kuljetusvaihtoehdot
Budbee Laatikko - Nouda valitsemastasi laatikosta!10,04
Bring - Toimitus huoltopisteeseen10,04
Bring - Kotiinkuljetus -arkisin.20,08
EUR 28,90
ilman ALV 23,03
Kokonaishinta sis. toimitus 38,94
Optical power meter with cable crystal head QC

The Ermenrich NetGeeks NU25 optical multimeter is a multifunctional device that can be used to measure optical power, find cable breaks, and determine other characteristics of a fiber optic network and its components.


The VFL (Visual Fault Locator) function allows you to assess cable damage using light signals. There are three types of such signals: constant glow, slow flashing, and fast flashing. Other network test results are displayed on a backlit color TFT screen, e.g., the connector crimping quality test and the frequency of the detected signal. The device connector is protected from dust and water by a removable plastic cap.


The device can operate on one of six main wavelengths: 850, 980, 1310, 1490, 1550, or 1625nm. The VFL function has a separate 650nm wavelength as well as detectable frequencies of 270Hz, 1kHz, and 2kHz. The device is equipped with optical connectors of FC/SC/ST standards as well as an RJ45 network connector. The Ermenrich NetGeeks NU25 Multimeter supports single-mode (SM) and multi-mode (MM) cables.


Key features:



  • The device is powered by a built-in non-removable 3.7V lithium battery

  • To save battery power, the auto-off function activates after 30 minutes of inactivity

  • There is six hours of battery life on a full charge

  • Optical power measurement in the range of −60 to +8dBm

  • Supports FC/SC/ST optical connectors and an RJ45 network connector

  • Three additional service functions: frequency detector, cable crystal head QC, VFL


The kit includes:



  • Transmitter

  • Remote module

  • USB Type-C cable

  • Pouch

  • User manual and warranty card

BrandErmenrich
Warranty5 years
EAN5905555023144
Package size (LxWxH)21x12x5 cm
Shipping Weight0.29 kg
Typeoptical multimeter
Optical power meter wavelength, nm850/ 980/ 1310/ 1490/ 1550/ 1625
Fiber connector typeFC, SC, ST
Connector typeRJ45
Maintained cable typesingle-mode (SM), multimode (MM)
Units of measurementdB, dBm, W
Power detection range, dBm-60 — 8
Option to set the reference levelyes
Visual fault locator (VFL)yes
Visual fault locator (VFL) wavelength, nm650
Continuity testyes
Сable crystal head QCyes
Input signal frequency detectionyes
Detected input signal frequency, Hz270/1000/2000
Displaycolor TFT
Display backlightyes
Power supplybuilt-in battery, 3.7V, 700mAh
Low battery status indicatoryes
Auto power offyes, after 30 minutes of inactivity
Operating temperature range, °C-10 — 60
Operating humidity range, %20 — 70