0,00
(toimituskulut: 0,00)
Levenhuk TR30, 3 jalkoja, Musta, 70 cm
Tuotenumero: [7794558] | Valmistaja: Levenhuk | Mallinum: 78395 | EAN: 5905555004037
Tuotetta ei ole varastossa. Lisätietoja
Kuljetus 10,04 - Budbee - Laatikko - Valitse itse mikä laatikko.
Toimituskulut on laskettu vastaanottajan postinumeron perusteella: - Vaihda postinumero
Syötä postinumero toimitusta varten:
Katso kuljetusvaihtoehdot
| Budbee Laatikko - Nouda valitsemastasi laatikosta! | 10,04 |
| Bring - Toimitus huoltopisteeseen | 10,04 |
| Bring - Kotiinkuljetus -arkisin. | 20,08 |
Loppuunmyyty
Tuotetta ei ole varastossa.
EUR
44,84
ilman ALV 35,73
Kokonaishinta sis. toimitus
54,88
Ilmoita minulle, kun tuotetta on jälleen tarjolla varastossa
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten
Luo käyttäjä
Kirjaudu
Luo käyttäjä
Kirjaudu
Send på mail
The Levenhuk Level BASE TR30 tripod is suitable for a carrying weight up to 8kg. This allows for installing quite heavy devices, e.g. oversized binoculars. The tripod is compatible with photo and video equipment, different accessories, and gadgets with a 1/4" thread. Please note that some devices can be installed on a tripod without an adapter, while others may require an adapter (not included).
The head features a classic design: can be rotated 360° as well as raised or lowered. You can lock it in the preferred position using the pan locking knobs on both axes. The pan bar handle is used for the head rotation. The platform position can also be changed. To flip the platform 90°, loosen the 90° locking knob. Then, tighten the knob by turning it clockwise.
This three-section tripod floor stand is made of aluminum. Each leg features the flip lock that allows you to adjust their height separately. You can raise or lower the center column with the special locking knob. The height of the tripod is 700mm. The center column features a hook. To achieve maximum stability, you can hang a load on it. The bubble level allows for setting a camera parallel to the ground.
The kit includes a pouch for carrying and storing.
The head features a classic design: can be rotated 360° as well as raised or lowered. You can lock it in the preferred position using the pan locking knobs on both axes. The pan bar handle is used for the head rotation. The platform position can also be changed. To flip the platform 90°, loosen the 90° locking knob. Then, tighten the knob by turning it clockwise.
This three-section tripod floor stand is made of aluminum. Each leg features the flip lock that allows you to adjust their height separately. You can raise or lower the center column with the special locking knob. The height of the tripod is 700mm. The center column features a hook. To achieve maximum stability, you can hang a load on it. The bubble level allows for setting a camera parallel to the ground.
The kit includes a pouch for carrying and storing.