BlueOptics CPAC-TR-10LR-B-BO, Kuitulevy, 10000 Mbit/s, SFP+, LC, LR, 10000 m

Superior PerformanceCheck Point CPAC-TR-10LR-B compatible 10GBASE-LR SFP+ Transceiver with LC Duplex connector according to MSA standards from the brand BlueOptics. The Check Point CPAC-TR-10LR-B compatible 10GBASE-LR SFP+ has a receiver (with 1310nm) and a transmitter (with 1310nm) for the transfer of optical signals via Single-mode fiber, taking the respective transmission protocol into account. The Check Point CPAC-TR-10LR-B compatible 10GBASE-LR SFP+ is suitable for the use in all major Check Point hardware platforms (such as switches, routers, storage systems, load balancers, gauges, etc.) that officially support the original Check Point CPAC-TR-10LR-B 10GBASE-LR SFP+. Each Check Point CPAC-TR-10LR-B compatible 10GBASE-LR SFP+ supports Ethernet, Fibre Channel over Ethernet or SDH/SONET high-speed applications of up to 10G per second on up to 10 Kilometer distance. Request a test sample now!Compatibility and QualityTo ensure 100% compatibility and functionality, all Check Point CPAC-TR-10LR-B compatible 10GBASE-LR SFP+ are tested for the use in the respective Check Point hardware while being adapted to the software requirements. Every Check Point CPAC-TR-10LR-B compatible 10GBASE-LR SFP+ from the brand BlueOptics is manufactured according to the defined MSA standards, like the original Check Point CPAC-TR-10LR-B Transceiver and contains the same, if not even better, single components from well-known traditional companies for data communication technology, such as high-quality lasers (e.g from Avago or Lumentum) and qualitative ICs (e.g., Maxim Integrated, Netlogic, Mindspeed or Analog Devices). This preselection of the world's best components for optical Transceiver modules results in an over-average product lifetime of more than 10 years for all Check Point CPAC-TR-10LR-B compatible BlueOptics 10GBASE-LR SFP+. Ask for your BlueOptics sample now!Compatibility and QualityTo ensure 100% compatibility and functionality, all Check Point CPAC-TR-10LR-B compatible 10GBASE-LR SFP+ are tested for the use in the respective Check Point hardware while being adapted to the software requirements. Every Check Point CPAC-TR-10LR-B compatible 10GBASE-LR SFP+ from the brand BlueOptics is manufactured according to the defined MSA standards, like the original Check Point CPAC-TR-10LR-B Transceiver and contains the same, if not even better, single components from well-known traditional companies for data communication technology, such as high-quality lasers (e.g from Avago or Lumentum) and qualitative ICs (e.g., Maxim Integrated, Netlogic, Mindspeed or Analog Devices). This preselection of the world's best components for optical Transceiver modules results in an over-average product lifetime of more than 10 years for all Check Point CPAC-TR-10LR-B compatible BlueOptics 10GBASE-LR SFP+. Ask for your BlueOptics sample now!Data Transmission at the Speed of LightFiber optic connections for optical data transmissions are not susceptible to electromagnetic interference (EMI) and offer the possibility of a wide variety of bandwidth variations. With Check Point CPAC-TR-10LR-B compatible 10GBASE-LR SFP+ of the BlueOptics brand, you can increase your bandwidth and reduce latencies with maximum availability without any loss. Check Point CPAC-TR-10LR-B compatible 10GBASE-LR SFP+ have a LC Duplex connector and can send and receive signals simultaneously through optical laser transmission, each over one fiber. The optimal connection should take place via an appropriate BlueOptics fiber patch cord, for example onto a patch panel or directly to another Check Point CPAC-TR-10LR-B compatible 10GBASE-LR SFP+ Transceiver. This results in the optimum range and quality of your fiber-optic link. Optimize your network now!Error Analysis with Digital DiagnosticsSimplify troubleshooting, maintenance, and monitoring in your network with the Check Point CPAC-TR-10LR-B compatible 10GBASE-LR SFP+ through the Digital Diagnostics Monitoring (DDM) / Digital Optical Monitoring (DOM) interface. With the help of the digital diagnostic function, which complies with MSA SFF-8472, the Check Point CPAC-TR-10LR-B compatible 10GBASE-LR SFP+ can deliver the following information in real time: Supply voltage, laser bias current, laser average output power, laser received input power and temperature. This feature of the Check Point CPAC-TR-10LR-B-compatible 10GBASE-LR SFP+ facilitates the remote maintenance of optical transmission links. Please ensure that the DDM / DOM function is supported by the hardware in which the Check Point CPAC-TR-10LR-B compatible 10GBASE-LR SFP+ is used, to access these features. Try it and start using BlueOptics products now!Maximum AvailabilityLess maintenance due to a long lifetime. Check Point CPAC-TR-10LR-B compatible 10GBASE-LR SFP+ of the brand BlueOptics are using components from leading manufacturers for communication technology only, such as Lasers (like Lumentum or Avago) and Integrated Circuits (including Maxim Integrated, Netlogic, Mindspeed or Analog Devices). For this reason, Check Point CPAC-TR-10LR-B compatible 10GBASE-LR SFP+ are designed for above average high operating times of over 1.000.000 MTBF hours. This corresponds to an average life span of 10 years and allows you to set up your network for the future. All Check Point CPAC-TR-10LR-B compatible 10GBASE-LR SFP+ provide high availability and reduce the likelihood of a failure of important optical data links in high-speed network systems to an absolute minimum. Benefit from BlueOptics Transceivers now!Full MSA ComplianceEach Check Point CPAC-TR-10LR-B compatible 10GBASE-LR high-availability SFP+ Transceiver complies with the Multi-Source Agreement (MSA) standard SFP+ Transceiver. When setting MSA standards for optical SFP+ Transceiver modules, manufacturers define standards for the SFP+ Transceiver to ensure interoperability with different hardware systems from different manufacturers. Here the SFP+ interface is settled electrically, mechanically and functionally, to grant that the communication of the devices among each other functions smoothly, as well as an exact fit is maintained. By the definitions and specifications defined in the MSA standards, the Check Point CPAC-TR-10LR-B compatible 10GBASE-LR SFP+ of the BlueOptics brand behave the same way as the original Check Point CPAC-TR-10LR-B 10GBASE-LR SFP+ and do not compromise any quality and functionality. Ask for a test sample now!Industrial StandardsCheck Point CPAC-TR-10LR-B compatible 10GBASE-LR SFP+ meet or exceed industrial standards such as CE and RoHS and the FCC regulations. Through continuous monitoring before, during, and after the ISO9001 manufacturing process, CBO achieves a steadily consistent quality of any Check Point CPAC-TR-10LR-B compatible 10GBASE-LR SFP+ Transceiver. The exact operation and the accuracy of the individual components of each Check Point CPAC-TR-10LR-B-compatible 10GBASE-LR SFP+ module, required for high-tech industrial applications, is controlled by various test methods. If you would like to be convinced of the nature and functionality, ask for your personal sample for testing purposes now and profit from the advantages of CBO's Check Point CPAC-TR-10LR-B compatible 10GBASE-LR SFP+ without any risk of loss of functionality.Act Now!With the use of Check Point CPAC-TR-10LR-B compatible 10GBASE-LR SFP+ of the BlueOptics brand, networks can be equipped to meet increasing requirements. Regardless whether an increased data volume, higher transmission rates, greater scalability, higher performance and/or a higher reliability is desired. With BlueOptics Check Point CPAC-TR-10LR-B compatible 10GBASE-LR SFP+ Transceivers, you can improve your connections and reduce your CAPEX for pluggable optics up to 90%. If you have any doubts or concerns with equivalent Check Point CPAC-TR-10LR-B 10GBASE-LR SFP+, do not hesitate to request a free sample and benefit now, just like your competitors, from the many advantages of the Check Point CPAC-TR-10LR-B compatible BlueOptics 10GBASE-LR SFP+ Transceivers and the long-term know-how of CBO in the field of fiber optics. Buy Check Point CPAC-TR-10LR-B compatible 10GBASE-LR SFP+ from BlueOptics now!BlueOptics CPAC-TR-10LR-B-BO. SFP transceiver type: Fiber optic, Maximum data transfer rate: 10000 Mbit/s, Interface type: SFP+. Product colour: Silver, Housing material: Metal, Mean time between failures (MTBF): 1000000 h. Weight: 20 g. Package weight: 30 g